The dual technology monostatic sensor MIR-M30 is intended for the protection of different sites, non-heated facilities and for detecting an intruder crossing the detection zone.

Add to compare

  • MIR-M30
Operational frequency 9,375 GHz
Range up to 40 m
Width of the detection zone up to 3,5 m
Number of letters 5
Supply voltage 9...30 V
Current consumption 0,04 A
Detection probability not less than 0,98
Operational temperature minus 40...+65 °C
Housing protection level IP-55
Alarm output relay contacts
Interfaces RS-485, UCB and Bluetooth (upon request)
Dimensions 210x135x95 mm
Weight 1 kg

The sensors are used for the protection of long perimeter sectors with high requirements for the mean time for false alarm, i.e. high immunity for industry, natural and common interference. There are two modifications of Dual Technology sensors, Monostatic – MIR-M.

The principle of operation: we achieved the high interference immunity of the sensor thanks to the combination of two different physical principles of operation – bistatic (monostatic) microwave (MW) and active (passive) infrared (IR), i.e. two ways of intrusion detection.

Different interferences influence differently on the processing channels. For example, the litter raised by the wind can activate the IR channel and the MW channel will stay inactive. That is why combination of these two physical principles and alarm initialization at the activation of both channels allowed to increase significantly the interference immunity.

There is no complete analogues of our sensors in architecture, design and integrated functionality.

The sensors are used to protect big and small industrial factories, military bases, transport structure, etc.

As the alarm is generated only at the activation of both channels, the resultant detection zone in case of bistatic dual technology sensors has small dimensions – the dimensions of the IR beam. Like this we can use the sensors for the protection of perimeter sectors requiring extra narrow detection zone.

The high survivability of the sensor is assured thanks to the performance of the sensor in case of failure or false alarming of one of the detection channels.

The principle of operation is based on the operation of two channels working on two different physical principles of detection: monostatic microwave and monostatic infrared.

We use the sensor FM-30 for microwave channel of MIR sensors. That is why all the advantages and features of FM are appropriate to MIR sensors, especially:

  • using of special software via USB or RS-485 interfaces allows to configure correctly the sensor in-field as well as remotely from the guard room.
  • the sensors detection zone is divided into sub zones, every sub zone can be configured separately, any sub zone can be disconnected to make secured passages for people or transport through gates.
  • the sensors have 5 frequency letters allowing to install and operate them near each other.

The sensors MIR-M30 have beam-shaped detection zone, that is why we recommend to use them for the protection of "frontiers".

Responses

E-mail: info@forteza-eu.com
Skype: Anton_Forteza
Tel: +7 (967) 4450161